Archive for the ‘Heating’ category

Can You Afford to Go Green?

January 16th, 2012

When energy efficient home improvements first exploded onto the home improvement scene, many of them were excessively expensive. Yes, they offered beefy long term savings but not many homeowners could afford the initial investment that it took to have these improvements installed. Nowadays, things are different. Green improvements are more popular these days, and manufacturers are bending over backwards to give the consumer what they want. This results in the ability to go green on a budget. One of the bigger investments that you could make in your home is the replacement of the HVAC system, and most of the major HVAC manufacturers have put out energy efficient systems that nearly anyone can afford.

Get More than the Minimum!

Replacing the furnace or air conditioner with a high efficiency system could save you hundreds yearly on your energy bills, but to maximize the savings you need to upgrade to the highest efficiency unit that you can afford. In the past this meant going with the minimum efficiency requirements and right now that would mean that you would purchase an 80% efficient furnace. Just because you operate on a budget doesn’t mean you have to settle for the minimum standard. » Read more: Can You Afford to Go Green?

Boilers Teetering on the Edge of Replacement

January 11th, 2012

Boilers may be considered an alternative form of heating for the home, but for many homeowner that have had a boiler in their home for years would never switch over to forced central air. Boilers do have their perks over the more common forced air furnaces, and one of these perks is the ability to last for extremely long periods of time. Some boilers can even go up to 40 years before breaking down entirely, and if you have never replaced the boiler that is currently operating your home, ask yourself, “How old is my boiler?” Odds are the unit is getting on in the years and because everything has been working fine, you probably have not even thought to check the condition of the system. Doing so may have you leaning towards replacement in the very near future.

2 Big Old Boiler Problems:

  • Lack of Energy Efficiency: Boilers that are over 20 years old, even if well maintained, cannot hope to be very energy efficient. These old systems were simply not built for energy efficiency and in many cases, the unit is somewhere around 50% inefficient. Every time that old boiler kicks on it waste tons of your money, and unless you want to keep paying more than necessary, you should replace the unit with a new high efficiency model. » Read more: Boilers Teetering on the Edge of Replacement

Furnace Outage Quick Fix

January 4th, 2012

Wouldn’t it be nice if you could avoid having to call a professional every time your furnace broke down? Well, in many cases there is little that you can do to prevent the need for a professional assessment, but there are a couple steps you can take on your own that may get the unit to kick on again. With any luck, you will be able to get the unit to heat the home at least until you can have a maintenance check performed. Most homeowners don’t realize that the majority of furnace breakdowns are caused by a part of the furnace needing to be cleaned. If you could get the unit to start up again, you could avoid the cost of an emergency call and schedule a cleaning for the unit instead.

Reboot Your Furnace

When the computer freezes up, the only thing you can really do is shut it down and reboot. Nine times out of ten this will solve the problem and this could also solve the problem with your furnace. Sometimes the system’s cycle is thrown off or maybe a breaker will pop and the unit will not kick on like it should. One of the easiest things any homeowner can do is shut the unit down completely, flip the breaker, and then turn the system back on at the unit switch. This is how you can quickly and easily reset the system, and sometimes it is enough to get the unit going. » Read more: Furnace Outage Quick Fix

How Your Water Tank Prevents Erosion

January 2nd, 2012

The hot water tank seems to be a rather simple device. Water enters the tank, is heated by the burners, and then transferred throughout the home, but if you really think about it, how is it that the water tank is able to come in contact with so much water and remain rust and erosion resistant? For some homeowners, stopping the tank from eroding isn’t such an easy task. Although there problem usually lies in a lack of proper hot water tank maintenance. There is one very valuable part of the tank that is checked during a maintenance cleaning, and if this part is no longer doing its job, the tank will quickly become vulnerable to erosion. Don’t wait until the bottom of your tank rots out to find out you have a problem.

The Anode and Its Function

The part of your hot water tank that we are talking about is the anode. This vital component of your system sacrifices itself to corrosion and spares the integrity of the tank. However, over time, this part will lose this ability. The aluminum or magnesium that is being corroded will eventually be gone, and the tank itself will begin to break down. This can be prevented though by having the anode checked and replaced why necessary. Some home needs to have the anode replaced as frequently as every 4 years, but other can last up to 6 or 7 years before replacement is needed. Either way, you will not know when you anode needs replacement if you do not have the tank maintained yearly. » Read more: How Your Water Tank Prevents Erosion

Don’t Turn Off the Furnace!

December 28th, 2011

As you head out the door this holiday season to visit family and friends for an extended period of time, there is one crucial mistake that you must not make. Do not turn off the furnace. Many homeowners are looking for any way to save money, and you may assume that since no one will be home to need the comfort of the furnace, it won’t matter if it is shut down for a few days. However, you would be wrong! Leaving the furnace off during winter puts your home at serious risk for water damage, but it can be prevented!

How Your Pipes Will Freeze

When the furnace is turned off completely, the home has no protection against the elements. All you need is one extra chilly night to surround your home and suddenly you will have frozen pipes around the house. Within hours the temperature will begin to warm as the sun rises and those pipes will begin to thaw. The ice will have expanded the pipe and could have caused cracks that compromised the integrity of the pipe. As it thaws, water will begin to force its way through and the pressure may cause the pipe to burst! » Read more: Don’t Turn Off the Furnace!

A Burn Free Winter: Water Heater Safety

December 26th, 2011

Having small children in the home highlights the many hazards that stand in the way of their safety. We lock up cabinets that house dangerous chemicals and cover sockets, but have you taken the necessary steps to prevent your children from experiencing a scalding burn? As our children age, they begin to take showers on their own and turn on and off the water when washing their hands. One wrong turn and your child could set the water so hot that it literally burns their skin. What may be hot water to your skin can spell disaster for your child, but luckily there is a simple way to childproof the water in your home as well!

Set Back that Tank!

The problem lies in the settings on your hot water tank’s thermostat. Many homeowners have never even touched this device and probably have no idea that there are different temperatures that you could set your tank at. When the tank is set at or above 150 degrees, it takes about 2 seconds to experience a scalding burn. No one needs the tank set the high, and odds are if you are tank is set at this point, you are also overpaying on your monthly energy bills. Set the tank back to 120 degrees and you will be surprised at the lack of difference it makes in your morning showers. » Read more: A Burn Free Winter: Water Heater Safety

Quiet Performance from a Variable Speed Furnace

December 19th, 2011

We have all had that feeling when we are home alone that someone else was sneaking around upstairs or in the basement. Every house makes noises that can trick the imagination into thinking something scary is lurking around the next corner, but for the most part, these noises can be ignored. However, if you have an old furnace with a traditional single speed motor in it, you may find that the sound of the furnace kicking on is one noise you simply can’t ignore. It is a whooshing, whistling noise that rattles through the ducts until your mind can tune it out. For many, the noisy furnace even interrupts their sleep, and at some point they decide they have had enough!

Why is My Furnace So Noisy?

The reason why furnaces with these types of motors are so noisy is because they only run at one speed: high speed. There is no in between and there is no time wasted working up to top speed. Instead the fan immediately starts up and a sudden blast of air is pushed out into the home creating the noise that wakes you in the night. This problem can be solved with a simple fan upgrade or you would make sure that your next furnace is built to not experience this problem. » Read more: Quiet Performance from a Variable Speed Furnace

How Much Electricity Does Your Furnace Use?

December 12th, 2011

All furnaces were not created equal, and when it comes time to purchase a new system for your home, this fact will become overwhelmingly obvious. In the past, most furnaces were similar, but with all of the technological advances in the heating industry, furnaces have many different gizmos and gadgets to choose from. All of these advances are designed to improve performance and many are also made to increase energy efficiency. If you are looking for a new high performance furnace, AFUE ratings will tell you a lot about the systems energy efficiency, but they don’t tell the whole story. Gas furnaces don’t just use gas to heat your home. You need to consider how much electricity your unit will require as well.

The Furnace and Its Blower Motor

Many homeowners don’t even realize that gas powered furnaces use electricity, but if you have a unit with an inefficient blower motor in it, your furnace could be using a lot more electricity than necessary. The standard blower motor has one speed: high. The unit comes on and the blower forces air all over the home until the home reaches the desired temperature. If you have an air purifier, humidifier, or fancy air filter, you may keep the fan running between cycles as well. This helps improve air quality and evens out the temperature in the home. However, these old motors waste much more energy than necessary and there is a better option out there. » Read more: How Much Electricity Does Your Furnace Use?

Why Does My Furnace Cycle On and Off Every Few Minutes?

November 30th, 2011

The average homeowner is not a furnace repair expert, so when something goes wrong with our system we often rely on the pros to make it all make sense. However, it is difficult to just trust a stranger at their word especially if you have never used that company before. That is why it is smart to get at least a general idea of some of the potential causes of your problem. A popular problem that many homeowners face is called short cycling. If this is a problem in your home, you will notice that the furnace turns on and off every few minutes and the temperature set on the thermostat is never reached. This can be very frustrating and disruptive for the homeowner and there are several causes that could be contributing to this problem. Some of the more common causes of this problem include:

  • Filthy Filters: A dirty filter will stop the proper amount of air from getting into your furnace. This leads of overheating that will trip the furnace to turn off as a safety mechanism. Simply change the filter and you could be back in business.
  • Lack of Air Flow: Snow and other debris can block the ventilation system of a high efficiency furnace. If this is your problem, the harmful gases created by the furnace will back up into the unit and force a protective shut down which will look like short cycling. Clean away the obstruction and you may be able to restore proper operation. » Read more: Why Does My Furnace Cycle On and Off Every Few Minutes?

Snow and Your High Efficiency Furnace

November 28th, 2011

It is the middle of winter. Through the night several inches of snow have fallen and suddenly the furnace won’t kick on. Everything seems to be working properly, but there is something standing in the way between you and your comfort! If you are the owner of a high efficiency furnace, finding yourself in this situation may be common, but luckily, there is a quick fix that may not even require the help of an HVAC serviceman.

New Technology

The technology that makes it possible for your furnace to operate at such high efficiencies is relatively new, and because of this fact, you may not be aware of some of the differences your new system has compared to the unit you had in the home before it. By improving the way that the system is vented, the manufacturers of your high efficiency furnace were able to get more energy out of the natural gas that the furnace would consume. However, this new venting system can become easily obstructed and the obstruction will trigger safety systems to prevent proper function of the system. » Read more: Snow and Your High Efficiency Furnace

Your source for feedback, News, and anything else Heating and Cooling Heating and Cooling