Posts Tagged ‘save money’

Can You Afford to Go Green?

January 16th, 2012

When energy efficient home improvements first exploded onto the home improvement scene, many of them were excessively expensive. Yes, they offered beefy long term savings but not many homeowners could afford the initial investment that it took to have these improvements installed. Nowadays, things are different. Green improvements are more popular these days, and manufacturers are bending over backwards to give the consumer what they want. This results in the ability to go green on a budget. One of the bigger investments that you could make in your home is the replacement of the HVAC system, and most of the major HVAC manufacturers have put out energy efficient systems that nearly anyone can afford.

Get More than the Minimum!

Replacing the furnace or air conditioner with a high efficiency system could save you hundreds yearly on your energy bills, but to maximize the savings you need to upgrade to the highest efficiency unit that you can afford. In the past this meant going with the minimum efficiency requirements and right now that would mean that you would purchase an 80% efficient furnace. Just because you operate on a budget doesn’t mean you have to settle for the minimum standard. » Read more: Can You Afford to Go Green?

Boilers Teetering on the Edge of Replacement

January 11th, 2012

Boilers may be considered an alternative form of heating for the home, but for many homeowner that have had a boiler in their home for years would never switch over to forced central air. Boilers do have their perks over the more common forced air furnaces, and one of these perks is the ability to last for extremely long periods of time. Some boilers can even go up to 40 years before breaking down entirely, and if you have never replaced the boiler that is currently operating your home, ask yourself, “How old is my boiler?” Odds are the unit is getting on in the years and because everything has been working fine, you probably have not even thought to check the condition of the system. Doing so may have you leaning towards replacement in the very near future.

2 Big Old Boiler Problems:

  • Lack of Energy Efficiency: Boilers that are over 20 years old, even if well maintained, cannot hope to be very energy efficient. These old systems were simply not built for energy efficiency and in many cases, the unit is somewhere around 50% inefficient. Every time that old boiler kicks on it waste tons of your money, and unless you want to keep paying more than necessary, you should replace the unit with a new high efficiency model. » Read more: Boilers Teetering on the Edge of Replacement

Going Green and Eliminating Water Waste

January 9th, 2012

If your home was built before 1990 and you haven’t replaced any of the original fixtures, odds are you are wasting tons of water with every flush of a toilet and turn of a dial. Old toilets and faucets use much more water than truly necessary for the needs of the home. An old toilet alone will waste around 17,300 gallons per year! That amount of waste not only takes a toll on your wallet every month, it also takes a toll on the condition of our planet. These appliances need to be upgraded to new low flow fixtures.

Traditional Vs Low Flow

The traditional toilet will use between 4 and 6 gallons with every flush, and that is way more water than is truly necessary to get waste out of your home. Nowadays, toilets must meet a government regulation that requires them to use only 1.6 gallons or less per flush of the toilet. You may have heard the many rumors that claim that these new toilets can’t handle the waste that they are intended to get rid of, but that is simply not the case. Early low flow toilets did have their fair share of problems, but these days, low flow toilets function as well if not better than your traditional wasteful toilet. » Read more: Going Green and Eliminating Water Waste

How Your Water Tank Prevents Erosion

January 2nd, 2012

The hot water tank seems to be a rather simple device. Water enters the tank, is heated by the burners, and then transferred throughout the home, but if you really think about it, how is it that the water tank is able to come in contact with so much water and remain rust and erosion resistant? For some homeowners, stopping the tank from eroding isn’t such an easy task. Although there problem usually lies in a lack of proper hot water tank maintenance. There is one very valuable part of the tank that is checked during a maintenance cleaning, and if this part is no longer doing its job, the tank will quickly become vulnerable to erosion. Don’t wait until the bottom of your tank rots out to find out you have a problem.

The Anode and Its Function

The part of your hot water tank that we are talking about is the anode. This vital component of your system sacrifices itself to corrosion and spares the integrity of the tank. However, over time, this part will lose this ability. The aluminum or magnesium that is being corroded will eventually be gone, and the tank itself will begin to break down. This can be prevented though by having the anode checked and replaced why necessary. Some home needs to have the anode replaced as frequently as every 4 years, but other can last up to 6 or 7 years before replacement is needed. Either way, you will not know when you anode needs replacement if you do not have the tank maintained yearly. » Read more: How Your Water Tank Prevents Erosion

Don’t Turn Off the Furnace!

December 28th, 2011

As you head out the door this holiday season to visit family and friends for an extended period of time, there is one crucial mistake that you must not make. Do not turn off the furnace. Many homeowners are looking for any way to save money, and you may assume that since no one will be home to need the comfort of the furnace, it won’t matter if it is shut down for a few days. However, you would be wrong! Leaving the furnace off during winter puts your home at serious risk for water damage, but it can be prevented!

How Your Pipes Will Freeze

When the furnace is turned off completely, the home has no protection against the elements. All you need is one extra chilly night to surround your home and suddenly you will have frozen pipes around the house. Within hours the temperature will begin to warm as the sun rises and those pipes will begin to thaw. The ice will have expanded the pipe and could have caused cracks that compromised the integrity of the pipe. As it thaws, water will begin to force its way through and the pressure may cause the pipe to burst! » Read more: Don’t Turn Off the Furnace!

Do It Yourself or Call a Pro

October 17th, 2011

“Do it yourselfers” have the best intentions at heart. They want to be hands on when it comes to taking care of their home and they want to save a few bucks along the way. For some projects, a homeowner truly can save some money by manning the work on their own, but for others, attempting them without professional experience could be disastrous. Knowing when the home repair is out of your league may be hard for some, but not assessing this possibility could cost you more than a little extra cash when you have to call in a professional.

Electrocutions and Floods

My father was one of those “do it yourselfers” that didn’t know the limits of his abilities. Many times, he would attempt a project with little more knowledge than that which he gained from a book. Sometimes he got lucky, but once he started messing with the electricity and the plumbing, things got ugly. It wasn’t until he electrocuted himself a few times and flooded the upstairs bathroom that he called a professional. I’m sure many of you are reading this thinking that you or someone else in your home fits this description of a determined “do it yourselfer,” but I am here to encourage you to take a step back and assess your limitations. » Read more: Do It Yourself or Call a Pro

Outdated Duct Work

October 10th, 2011

So you are purchasing a new HVAC system for your home, and you have already found the perfect furnace and air conditioner to replace your old outdated units. You have the systems installed, but once you really start using them, you don’t notice much of a difference between the way the old units worked and the way the new systems work. Sure the energy bills are a little bit lower, but did you really get the return on the investment that you were expecting? If not, the problem may not be with your new systems. The problem is probably located in the most commonly neglected portion of the HVAC system: the duct work.

Assessing the Ducts

            The duct work is more important most homeowners think. Sure, the ducts may not have any fancy gadgets, but their ability to transport air effectively is crucial to the efficiency of your heating and cooling systems. If the air they are conditioning cannot get to the target rooms effectively, you will pay more every month for wasted energy that could have been saved by simply caring for this part of the system. The first step towards getting your ducts working the best that they can is to have them inspected by a professional. A true pro can give you an honest assessment of your ducts, and if they can be salvaged, the repair job is simple. If some parts need to be replaced, it may take a bit more effort, but it is necessary to complete so you can get the most out of your new heating and cooling units. » Read more: Outdated Duct Work

Quick Tips to Save Energy

September 28th, 2011

With the rising cost of energy, it is very important and practical to conserve electricity as much as we can. Conserving energy not only helps us lower our electric bills, but it also helps protect our natural resources as well. There are a lot of ways to conserve energy. Most of them are so simple, even your kids can do it. Here are just a few to get you started:

5 Tips to Start Saving Energy

1. Turn off the lights when leaving a room at night. Electrical lights consume a large amount of energy especially if you are using incandescent lights which are energy inefficient kind of lights. Make it a habit to turn the lights off and see how much you could save on your electricity bills.

2. Unplug your appliances when you’re not using them. Appliances that are plugged still consume energy even if they are turned off so to avoid this from happening, unplug everything that is not in use. » Read more: Quick Tips to Save Energy

Get in for Your Furnace Cleaning!

September 14th, 2011

We may have one or two more warm days on the schedule but for the most part, fall weather has arrived and winter’s chill is soon to follow. As we enjoy these few months of HVAC free comfort, it would be easy to forget about these important systems all together. However, you don’t want to find yourself testing the furnace or boiler for the first time when the temperatures start to drop. Instead, take this time to dedicate some of the money you are saving on your energy bills from not using the system and spend it on your yearly maintenance check up.

The Consequences of Procrastination

            Many homeowners find themselves in a bit of a pickle when they put off having the furnace cleaned early in the fall. HVAC companies prepare for an onslaught of calls once the first frost hits and every year without fail, they are not disappointment. Thousands of people across the country scrambling to have their heaters looked at because they neglected to have them checked when the weather was more mild. Those that don’t have a problem with the unit find themselves forced to work around the very tight schedules that these HVAC companies are now operating under. If they had simply called a few weeks prior, they could have had free pickings of their preferred date and time. Instead they must change their schedule to fit in with what the company can now offer. » Read more: Get in for Your Furnace Cleaning!

Make Your Contractor Fight for Your Business

September 7th, 2011

 If you are one of the many homeowners that are currently looking for a new HVAC system you may feel like it is you against the HVAC contractor that diagnosed your unit as faulty. It would be easy to simply take them at their word and replace the system with whatever they have to offer, but wouldn’t you rather take control of the sale? Well, you can. All you have to do is get a few estimates. Many homeowners don’t want to bother with the hassle of having 3 different companies out for an estimate on a new furnace or air conditioning system, but not doing so could cost your hundreds and maybe even thousands of dollars.

Taking Advantage of a Desperate Situation

The first way you loose money by not getting multiple estimates is by purchasing the unit right off the bat from the company that diagnosed the system as faulty. Many times the unit breaks down when we need it most and in our desperation for comfort we may agree to anything. Some companies will take advantage of this desperation and do little to nothing to save you money on your system. Instead, step back, take a breath, and give it some thought. Don’t jump into a sale without assessing all of your options. » Read more: Make Your Contractor Fight for Your Business

Your source for feedback, News, and anything else Heating and Cooling Heating and Cooling